MinkaAire Bolo Instruction Manual download pdf (Page 12)

ELECTRICAL CONNECTIONS

REMEMBER to shut the power off at the circuit breaker or fuse box.

Follow the steps below to connect the fan to your house supply wires. Use the

wire nuts supplied with your fan. Secure the wire nuts by wrapping the

connection with electrical tape.

Step 1. Connect the black (hot) wire from the ceiling to the black and the blue

wires from the fan. Connect the white (Neutral) wire from the ceiling to the

white wire from the fan. (Fig. 11)

Step 2. If your outlet has a ground wire (Green or Bare Copper) connect the fan

ground wires (on hanger ball and hanger bracket) to it; otherwise connect the

fan ground wire on hanger ball directly to the hanger bracket. (Fig. 11)

Step 3. Figure 12 & 13Illustrate the wiring connections using optional wall unit.

(Available at your Minka-Aire

Retailer.)

NOTE: If a light kit is not included with your fan, one can be purchased at your

Minka-Aire

Retailer.

Fig. 11

BLACK (HOT)

WALL

WHITE (NEUTRAL)

GREEN (GROUND)

CEILING

HOUSE WIRE SUPPLY

BLUE (OPTIONAL LIGHT)

BLACK (MOTOR)

WHITE (NEUTRAL)

FAN CONTROLLED BY PULL CHAIN, LIGHT KIT CONTROLLED BY PULL CHAIN.

GROUND

(CONNECT TO GROUND WIRE ON

HANGER BRACKET IF NO HOUSE

GROUND WIRE EXISTS.)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

MinkaAire Bolo Instruction Manual Page 12